This is the SR-NIEL Code Web application. Unregistered users can freely access NIEL calculators based on Robinson partition function.

The following links give access to electrons, protons and ions NIEL code:

- Electrons NIEL Calculator

- Protons & Ions NIEL Calculator

 

How to use this NIEL Calculator


This tool calculates the Screened Relativistic (SR) Non-Ionizing Energy Loss (NIEL) curve for a particle incident on a material. For information about the computation method take a look at the NIEL and Displacement Stopping Power page.

The input parameters and options for the tool are described below. When the input form has been completed, pressing the "CALCULATE" button will start the calculation and open the "Results" page (allow for pop-up in your browser settings). The result page will be also linked at the bottom of the calculator page.

Input Parameters:

- Incident particle (for Protons&Ions Calculator)
- Proton and ion model (for Protons&Ions Calculator)
- Electron form (for Electrons Calculator)
- Target material
- Calculator energy limits
- Particle Fluence for Dose calculation.

 

Incident Particle

In the Protons&Ions Calculator, using the pull down menu, the user can select the species of the incident particle, either a proton or one of the elemental ions.

Electron Form

In the Electron Calculator it is possible to specify the nuclear form factor model to be used. This is one of Exponential, Gaussian or Uniform. This form factor accounts for the spatial distribution of charge density probed in the electron-nucleus scattering.

Proton and Ion Model

When a proton or ion is selected as incident particle, it is possible to specify the different contribution to the total non-ionizing energy loss that is returned: the Coulomb scattering contribution, the contribution of the Hadronic interaction or the Total contribution (Hadronic + Coulomb).

In the present NIEL calculators, for protons up to 1 GeV and alpha-particles up to 1 GeV/nucleon impinging on elements with atomic number from Z=4 up to Z=51, as already mentioned in NIEL and Displacement Stopping Power page, the hadronic contributions were interpolated or extrapolated from those obtained from [Jun et al. (20032004),Jun (2017)] regarding 10 absobers, i.e., C, Al, Si, P, Ga, Ge, As, In, Cu, Se with corresponding displacement thresold energy of 35, 20, 21, 9, 10, 20, 10, 7, 25, 20 eV, respectively .For silicon absorbers, in addition, the hadronic contribution for energies from 1 up to 24 GeV was obtatined from [Huhtinen (2002)]
As default option (no scaling), no Ed depence is included for the hadronic contribution to NIEL. It has to be remarked that such a beviour is consistent with the results obtained for neutron damage functions with MeV neutrons (up to 20 MeV) by means of NJOY-2012 code (e.g. see NJOY based neutron NIEL calculator). As alternative option (linearly scaled), the hadronic contribution are linearly varied with respect to the calculated by the same amount found for Coulomb contributions.

 

Target Material

In this section it is possible to specify the composition of the target material selecting the number of elements in the compound. The required parameters for each element are:

- Atomic number (Z)/Chemical symbol
- Stoichiometric index or element fraction
- The displacement threshold energy [eV]

Energy Limits

This section define the energy limits of the calculation, and the following parameters will be defined:
- Minimum Energy of the incident particle
- Maximum Energy of the incident particle

The output table will contain 20 fixed values for each decade within the above selected range.

Moreover a text box is provided for entering additional energies. The input format is one energy per line; it is also possible to copy and paste energy values.

if Hadronic calculation is included (Hadron only and Coulomb+Hadron cases) the Maximum energy is limited to 1GeV (due to hadronic interaction data availability).

 

Particle Fluence for Displacement Damage Dose Calculation

Here is defined the particle fluence that is used to obtain the deposited NIEL Dose (i.e., the displacement damage dose).

 

Result

The result page contains the input parameters, the NIEL curve and the result table, which includes the NIEL, and the NIEL Dose (in [MeV g-1] and [Gy])